fuseholders fas www.schurter.com/pg0 2 fuses shock-safe fuseholder, 5 x 20 mm, fingergrip, horizontal, pc1 fingergrip 250 vac 1.6 w / 6.3 a description - shocksafe category pc1 standards - iec 60127-6 references weblinks general product informatio n , approval s , roh s , china-roh s , e-stor e , schurter-stock-chec k , distributor-stock-chec k technical data shocksafe category pc1 fuse-link 5 x 20 mm mounting pcb terminal solder tht rated voltage 250 vac rated current 6.3 a rated power acceptance iec 1.6 w / 6.3 a @ ta 23 c admissible power acceptance at hig - her ambient temperature see derating curves degree of protection ip 40 protection class suitable for appliances with protection class 1 or 2 acc. to iec 61140 admissible ambient air temp. -40 c to 85 c climatic category 40/085/21 acc. to iec 60068-1 material: socket thermoplastic, ul 94v-0 material: cap thermoset, ul 94v-0 material: terminals tin-plated copper alloy unit weight (socket/cap) 4.7 g storage conditions 0 c to 60 c, max. 70% r.h. product marking , voltage, current, approvals soldering methods wave solderability 235 c / 2 sec acc. to iec 60068-2-20, test ta, method 1 resistance to soldering heat 260 c / 10 sec acc. to iec 60068-2-20, test tb, method 1a contact resistance < 5 m at 20 mv dielectric strength > 3 kv between l-n (50 hz; 1 min) impulse withstand voltage > 4 kv between l-n insulation resistance > 10 m between l-n (500 vdc; 1 min) overvoltage category i - iii acc. to iec 60664-1 pollution degree 1 - 3 acc. to iec 60664-1 abmessungen 31 mm ? ? 9.5 8 31 12.5 4 5.2 10 1.2 6 12 5.25 5 0 -0.2 0.2 +0.2 0 1.3 +0.1 0 12.5 0.1 drilling? diagram
2 fuseholders fas www.schurter.com/pg0 2 fuses derating curves admissible? power?acceptance?in? watt 0 2 0 4 0 6 0 8 0 100 0.2 0.0 i = < < i n i = 0.7 i n i = 1.0 i n 1.6 0.6 0.4 0.8 1.2 1.0 1.4 ambient?air? temperature? ta ?c variants holder cap terminal degree of pro - tection order number l slot?knob straight ip?40 0031.3501 packaging unit bulk (100 pcs.) the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
